Wall Controls

Using Wall Controls For A Ceiling Fan And Lights

Wall controls are relatively easy to install and can make a big difference in the operation of the fan. If a ceiling fan doesn’t come with a wall control, it’s easy to buy universal wall controls for fans that will work with any type of ceiling fan and light. When buying a fan from a big company like Hunter check to see if the fan has a wall control before purchasing. Sometimes a Hunter wall control can be purchased as a separate accessory for a fan. It’s also possible to wall mount a remote control for a fan so that the remote doesn’t get lost. It’s fast and easy to put up a wall mount for a remote control that controls the fan and that way everyone knows where the remote is when it’s not being used. Install a wall fan control with a remote and it will always be easy to adjust the fan and the lights from the wall control or from the remote.

When To Replace Wall Controls

Most people don’t think about replacing the wall controls for their ceiling fans on a regular basis but a broken wall control could be the reason that the fan isn’t working properly. Because wall controls get used a lot they can break down and need to be replaced. Especially the sliding wall controls, which tend to get overused and used roughly, especially by kids who think it’s fun to run the sliders up and down, up and down, up and down which can wear them out or cause the sliding pieces to break off. When a wall control unit needs to be replaced it’s not that hard to buy a new one and install it. Most hardware stores or home improvement stores carry universal wall control units that will work with any fan or light combination and can be easily installed into the space where the other wall control fit. Sometimes it’s as easy as changing the faceplate for an electrical switch. Sometimes it’s more difficult, but usually most home owners can install it themselves. When putting in a new wall control for the fan consider putting in a wall control that will control the fan, the lights, and had a wall mounted remote control also. It’s best to install them all at once and prevents the need to go back and install separate components later on.